MGF COIL SPRING CONVERSION KIT
BGF7004
In Stock
Product Description
These units are turned from solid billet with a hard anodised black Surface finish which looks very impressive when you open the box!
The kit consists of the following;
2 off front spring canisters
2 off rear spring canisters
2 off front non adjustable dampers
2 off rear non adjustable dampers
1 off fitting instructions
Fitting is simply as a direct replacement for the original displacer utilising the original pressed steel mounting plates. Then mount on the ball joint and offer up to the body with the adjuster fully in. Once bolted in place the adjuster is wound out fully to set the car at the optimum standard ride height. The car can be lowered only to a point which does not interfere with the standard geometry.
The kit consists of the following;
2 off front spring canisters
2 off rear spring canisters
2 off front non adjustable dampers
2 off rear non adjustable dampers
1 off fitting instructions
Fitting is simply as a direct replacement for the original displacer utilising the original pressed steel mounting plates. Then mount on the ball joint and offer up to the body with the adjuster fully in. Once bolted in place the adjuster is wound out fully to set the car at the optimum standard ride height. The car can be lowered only to a point which does not interfere with the standard geometry.
Product FAQ
File Downloads
Technical Details
| weight | 17 |
|---|
